|
3. Put back plate on door. Align with front deadbolt
part. Use long bolts to join the back plate and
the front deadbolt assembly together. Hand
tighten, make sure that front deadbolt assembly
is straight and in proper position.
|
|
4. Next put the back assembly on to see if all parts
align properly. If they align, then use screws to
secure the back plate to the door.
|
|
5. Next, align back assembly onto the back plate.
When in proper position use small screws
to secure back assembly to back plate.
|
|
6. Then, align catch plate to the wall that is flush with
the door. Hold in position and test the deadbolt by
turning the lock in and out. Make sure the deadbolts
engage into the catch plate smoothly. Finally screw
the catch plate into the wall in proper place and height.
|
